LightRules Facility Map

LightRules Facility Map


Overview

The LightRules facility map can be used to determine the serial number and communications status of fixtures within the facility based on the fixtures location.

Tools

Determine Communications Status

  1. Click the Config tab and select Map to view the LightRules Facility Map. By default the Facility Map displays the rooms and zones within the facility
  2. Move the slider in the top-left from Rooms to Status to view the communications status of each fixture. Communicating fixtures will display as green circles while non-communicating fixtures will display as yellow or red circles
Idea
Tip for malfunctioning fixtures: If a fixture has no light bars illuminating or status indicators blinking, then it is likely not communicating with LightRules.  Referencing the location of malfunctioning fixtures within the facility to the location of yellow circles on the Light Layout map can be a useful method for determining fixture serial numbers without physically accessing the fixtures.
Info
Clicking a circle fixture status icon will expose a pop-up containing the fixture name in the top row.

Determine the Serial Number

  1. Click the Config tab and select Map to view the LightRules Facility Map. By default the Facility Map displays the rooms and zones within the facility
  2. Clicking a square fixture icon will expose a pop-up containing the fixture name in the top row
  3. Click the fixture name (top row) to access a fixture information page containing the serial number

Ping Fixtures

  1. Clicking a circle fixture status icon will expose a pop-up containing the fixture name in the top row
  2. Clicking the status circle in the pop-up will ping the fixture to check the communications status
    1. If the ping is successful, then the communications status will return green with a "Ping success" message.  If the ping fails, then the communications status will return red with a "Ping failed" message.

    • Related Articles

    • Troubleshooting LightRules Gateways

      The following guide will provide troubleshooting steps that will not only remedy several issues that can arise, but expedite the support process if initial troubleshooting is unsuccessful. Gateway Status The first step is to understand the status of ...

    • How to determine serial number from LightRules facility map

      Overview The LightRules facility map can be used to determine the serial number and communications status of fixtures within the facility based on the fixtures location. Instructions Process for determining the communications status from Facility Map ...

    • LightRules System Troubleshooting Guide

      Overview Troubleshooting steps to diagnose fixtures connected to LightRules not behaving as expected. The most common causes are network communications issues, individual fixtures malfunctioning, groups of fixtures not receiving power or incorrectly ...

    • Upload a Map File on a Standalone LRA

      This article describes the process for uploading a map file to a LightRules Appliance (LRA). This process is most often used for standalone LRAs which are not connected to the enterprise network and are accessed via ethernet or via an attached ...

    • How to Resolve "Fixture is in Safe Mode (DIPs)" Messages

      Overview Messages Indicating Fixture is in Safe Mode LightRules and Commissioner will alert the user when fixtures are in Safe Mode unless the fixture model is an ILE-HB-3, ILE-MB-3 or ILE-3 fixtures of hardware revisions 1 to 14. Alerts will show up ...