LightRules Documentation

The Digital Lumens LightRules system was discontinued in 2017 and reached end of life in late 2022. SiteWorx does not provide support for the LightRules platform.

The legacy LightRules Documentation site is available at https://documentation.lightrules.net/.

Many LightRules lighting systems are compatible with SiteWorx and can be upgraded with minimal effort. To get started, reach out to your reseller or email sales@siteworx.io.

• Related Articles

• Troubleshooting LightRules Gateways

  The following guide will provide troubleshooting steps that will not only remedy several issues that can arise, but expedite the support process if initial troubleshooting is unsuccessful. Gateway Status The first step is to understand the status of ...

• LightRules System Troubleshooting Guide

  Overview Troubleshooting steps to diagnose fixtures connected to LightRules not behaving as expected. The most common causes are network communications issues, individual fixtures malfunctioning, groups of fixtures not receiving power or incorrectly ...

• Create a LightRules Backup Drive

  Overview The following instructions detail how to create a LightRules Appliance Backup USB Drive for LightRules versions 2.8.X or higher. Disclaimer Please follow these instructions precisely as deviation from them may result in improperly configured ...

• LRA Emergency Mode - root@lightrules

  Overview File system errors may cause a LightRules Appliance (LRA) to be unable to boot properly. When a LRA to be unable to boot properly, error messages will appear on a monitor such as "warning mounting unchecked fs, running e2fsck is recommended" ...

• How do I exit the LightRules 3.X Screen Saver?

  Overview When a monitor and keyboard are connected to a LightRules Appliance (LRA) running LightRules 3.0 or newer, pressing CTRL - ALT - DELETE on the keyboard will enter into the "XScreenSaver 5.34" mode seen below. Instructions To exit out of this ...